Cixi Jinhao Communication Equipment Co., Ltd.
Optical fiber hopping is to connect the two ends of the optical fiber face to face, to maximize the energy output of the transmitting optical fiber coupled to the receiving optical fiber, and to minimize the impact on the system due to its involvement in the optical link. Cixi Jinhao Communication Equipment Co., Ltd. is a professional manufacturer of optical fiber jumper.
Fiber optic jumper connection
How to Connect Optical Fiber Jumpers
Optical fibers are divided into single-mode and double-mode. The transmission distance of single-mode is about 1500, and that of double-mode can reach more than 10 kilometers. Optical fibers can be converted to RJ45 or RS232 cable signals by optical terminals.
Optical fiber jumpers are usually connected to spectrometers or optical brackets. Optical fiber jumpers are connected to optical terminals. Optical terminals can convert optical signals into electrical signals that we usually use. Optical fiber jumper is a device that links the two ends. Normally, the ST head is connected to the optical fiber box, the LC head is connected to the optical fiber module of the switch, the SC head of the optical transceiver, the optical terminal and the ODF head are connected to the FC head.
Optical fiber jumper is the connection of two optical fiber devices. There are many models, such as ST-ST, ST-LC, LC-LC, ST-SC and so on. The choice of model depends on whether your optical fiber device interface is ST or LC or SC. The jumper is also divided into single and double modes.
How to Connect Optical Fiber Jumpers
Following is an example of the application of optical fiber jumper connection:
Telecommunication Bureau optical fiber to enterprise, usually first dual-mode optical fiber to enterprise main room, then optical terminal, converted into RJ45 signal into enterprise firewall, then into CORE, in the optical fiber transceiver and optical fiber jumper can be converted into optical fiber, and then through the internal optical fiber transmission to each branch room.
Optical fiber jumper connection method can only be decided according to the actual situation, so in order to reduce unnecessary trouble, it is more reassuring to find a professional construction team to install and debug.
