Cixi Jinhao Communication Equipment Co., Ltd.
1) The radius of curvature of optical fibers should be no less than 30 mm no matter where they turn when they are laid in the cabinet.
2) The terminal, welding and storage of optical fibers in the corridor's optical fibre wiring box should be conveniently configured in a complete set within the full capacity range.
3) Optical splitting inserts should be modular and integrated, and there should be no jump joint in the corridor optical splitting box.
4) The cover of welded box can be opened, installed directly in the box, and operated outside the box. It is simple and convenient to use.
5) When the cable is introduced into the equipment, reliable fixing and protection devices must be provided. The fixed metal moisture barrier layer, armor layer and reinforcing core of the cable must be reliably connected to the high-voltage protective grounding device. After the cable is peeled, the plastic sleeve or spiral pipe must be used to protect and fix the optical fiber fusion device.
6) The cable termination device of the equipment must be convenient for the operation of splicing, installation and maintenance of the optical fiber and the optical fiber of the cable or the tail fiber, and at the same time, it must have the storage space of the surplus optical fiber of the cable.
7) Fiber optic connector must be protected. After the fusion of optical fibers and optical fibers, the joint part must be protected by the fusion protection sleeve.
8) The tail fiber can quickly and conveniently dispatch the serial number of the optical fibers in the optical cable and change the routing of the transmission system. The length of the tail fiber must meet the requirements of fiber hopping operation.
9) Fiber optic cabinet door lock must be anti-theft structure, with good anti-damage ability. All cabinets need reserve traditional padlock lock or other alternative solutions.
Cixi Jinhao Communication Equipment Co., Ltd. is a professional manufacturer of optical fiber fusion disc.
